Virtual Tape Library Slots
2022年1月3日Register here: http://gg.gg/xfcbs/1
*Virtual Tape Library Solutions
*Virtual Tape Library
*Virtual Tape Library Free
*Virtual Tape Library Slots Software
To archive a tape in DPM Open the context (right-click) menu for the tape you want to archive, and then choose Remove tape (I/E port). In the dialog box that appears, choose Yes. Doing this ejects the tape from the medium changer’s storage slot and moves the tape into one of the gateway’s I/E slots.
ACSLS supports a new LSM type (StorageTek VTL) which identifies generic virtual libraries as implemented in the FalconStor-based VTL product line. A StorageTek VTL library can be configured, managed, and operated just like any other single-LSM, SCSI-attached library.Virtual Tape Library Solutions
ACSLS represents a StorageTek VTL configuration using the PRC-style identifiers (panel, row, column) to which you are familiar. Use these PRC-style identifiers when issuing ACSLS or ACSAPI requests against a StorageTek VTL library. These include cell identifiers (acs, lsm, panel, row, column), drive identifiers (acs, lsm, panel, transport) and CAP identifiers (acs, lsm, cap).Supported Configurations
The StorageTek VTL configuration is recorded in the acsss_config.log file when a library is configured to ACSLS. This file is generally used only for diagnostic purposes. Panel descriptions are also displayed during dynamic configuration (using the config utility).
The following table describes the VTL configurations supported by ACSLS.Number of Storage CellsStarting Element AddressNumber of DrivesStarting Element AddressNumber of Import/Export ElementsStarting Element Address1-10,00010001-1005001-2010
*The HPE 9x00 virtual library system is deployed, managed and operated just like a tape library minimizing disruptions to the environment. Emulations include the HPE ESL E-series and MSL tape libraries as well as 1/8 G2 tape autoloaders and tape drives that include the HPE Ultrium 230 Tape Drives (LTO-1), HPE Ultrium 460 Tape Drives (LTO-2), HPE Ultrium 960 Tape Drives (LTO-3), HPE Ultrium 1840.
*Once the VTX bit x’20’ FLAG5 has been turned on in the TMC record, virtual tapes continue to be moved according to the VPD rule, but slot assignment is bypassed. The slot number is set to a dummy value of 9,999,999 (a ’virtual slot’).
*A VTL is exactly what the name implies: a software-generated object that simulates the behavior of a tape library, including robotics, cartridge slots and tape drives for the benefit of OSes.
*
Yukon gold casino no deposit bonus codes 2019. Number of storage cells: 1 to 10,000
*
Starting element address: 1000
*
Number of drives: 1 to 100
*
Starting element address: 500
*
Number of import/export elements: 1 to 20
*
Starting element address: 10Virtual Tape Library
The following describes library components support:
*
Panels
Each supported configuration is presented as a set of panels where:
*
Panel 0 - contains a CAP only
*
Panel 1-10 - contains storage cells and drives
*
Panel 11-50- contains storage cells
*
CAPs
A single CAP is supported. It is identified as CAP 0, and can contain up to 20 CAP cells. The CAP is defined on panel 0 of a StorageTek VTL.
*
Storage Cells
Storage cells are organized into panels containing 200 cells per panel. The largest configuration contains 50 200-cell storage panels for a total of 10,000 cells.
Storage cells are defined on panels 1-50 of a StorageTek VTL.
*
Drives
Drives are organized into panels containing up to 10 drives per panel. The largest drive configuration contains 10 drive panels for a total of 100 drives.
Drives are defined on panels 1-10 of a StorageTek VTL.
*
PTPs
Pass-thru ports are not supported.VTL Behavior
The following behaviors apply specifically to the VTL:
*
Enter Operations
Enter operations in ACSLS are not useful for adding tape volumes to a StorageTek VTL library. In order to discover new volumes in a VTL library, an audit should be performed against that library. This includes the discovery of volumes that may have been imported from the VTL virtual vault.
Enter operations are not explicitly rejected for StorageTek VTL. If you initiate an enter operation, it can simply be canceled.
*
Eject Operations
Eject operations in ACSLS are supported. Any ejected volumes are viewed by the VTL product as now residing in the virtual vault, but this is a VTL feature only - ACSLS is not aware of the virtual vault.
*
Mount and Dismount Operations
ACSLS mount options (read-only, bypass) and dismount options (force) are accepted, but ignored by the StorageTek VTL library. In addition, a normal dismount (without the force option) appears to function as if the force option had been specified.
Caution:Be careful when performing dismount operations, as they may dismount a virtual tape volume while data path operations are in progress.
*
Virtual Tape Drives
After adding or removing virtual drives in a VTL, use the config drives utility to re-examine the drive configuration in ACSLS. When removing virtual tape drives from the VTL, you will need to delete the drives, not just un-assign them, using the VTL Console. Assignment or un-assignment of virtual drives affects the data path and does not affect ACSLS.Virtual Tape Library FreeConfiguring the VTL to ACSLS
This section describes the prerequisites and installation procedures when configuring the VTL to ACSLS.Prerequisites
Before configuring the VTL to ACSLS, you must meet the following prerequisites:
*
ACSLS has been installed, and includes a fibre-channel HBA
*
VTL system has been installed
*
There is fibre-channel connectivity between the systems (an ACSLS initiator port must be connected to a VTL target port)Installation
To configure the VTL to ACSLS, perform the following steps:Virtual Tape Library Slots Software
*
Is black jack chewing gum gluten free. Create a virtual library (StorageTek-VTL) using the VTL console.
Notes:
*
Port perry casino menu. When creating a virtual tape library for use by ACSLS, the tape identifiers for that library should match the traditional 6-character volume label format supported in ACSLS.
*
The VTL Console allows you to create a StorageTek VTL library which exceeds the limits that are supported by ACSLS (10,000 slots, 100 drives). However, if you try to configure an unsupported configuration to ACSLS, the configuration request will fail.
*
When creating a new StorageTek VTL library, the VTL Console gives a warning setting the slot count higher than 678. This warning limit is based on the L700 capacity, and can be ignored for StorageTek VTL library model.
For procedures, refer to the StorageTek Virtual Tape VTL Plus 2.0 (Update 2) Library Software Configuration Guide.
*
Assign the VTL library to ACSLS.
For procedures, refer to the StorageTek Virtual Tape VTL (Plus 2.0 Update 2) Library Software Configuration Guide.
*
Create a SCSI mchanger device driver.
ACSLS is able to automatically discover StorageTek VTL libraries and to create the corresponding /dev/mchanger entries. This discovery takes place when running the install_scsi_sol.sh scripts during installation.
Refer to ’Installing Connections to Your Library Hardware’.
*
Configure VTL to ACSLS.
*
Once the VTL components are operational, configure VTL to ACSLS.
*
Use the following command:
acsss_config
For more information, refer to ’Setting CSI Tuning Variables’ or config acs new (see ’Adding a new ACS’.
*
Audit the VTL library.
After configuring a StorageTek VTL library to ACSLS, an audit must be performed in order to discover the virtual tape volumes, and to identify any inaccessible cells (a panel may only be partially accessible).
*
Use the display lsm * -f type serial_num command to view the VTL configuration.
Register here: http://gg.gg/xfcbs/1
https://diarynote-jp.indered.space
*Virtual Tape Library Solutions
*Virtual Tape Library
*Virtual Tape Library Free
*Virtual Tape Library Slots Software
To archive a tape in DPM Open the context (right-click) menu for the tape you want to archive, and then choose Remove tape (I/E port). In the dialog box that appears, choose Yes. Doing this ejects the tape from the medium changer’s storage slot and moves the tape into one of the gateway’s I/E slots.
ACSLS supports a new LSM type (StorageTek VTL) which identifies generic virtual libraries as implemented in the FalconStor-based VTL product line. A StorageTek VTL library can be configured, managed, and operated just like any other single-LSM, SCSI-attached library.Virtual Tape Library Solutions
ACSLS represents a StorageTek VTL configuration using the PRC-style identifiers (panel, row, column) to which you are familiar. Use these PRC-style identifiers when issuing ACSLS or ACSAPI requests against a StorageTek VTL library. These include cell identifiers (acs, lsm, panel, row, column), drive identifiers (acs, lsm, panel, transport) and CAP identifiers (acs, lsm, cap).Supported Configurations
The StorageTek VTL configuration is recorded in the acsss_config.log file when a library is configured to ACSLS. This file is generally used only for diagnostic purposes. Panel descriptions are also displayed during dynamic configuration (using the config utility).
The following table describes the VTL configurations supported by ACSLS.Number of Storage CellsStarting Element AddressNumber of DrivesStarting Element AddressNumber of Import/Export ElementsStarting Element Address1-10,00010001-1005001-2010
*The HPE 9x00 virtual library system is deployed, managed and operated just like a tape library minimizing disruptions to the environment. Emulations include the HPE ESL E-series and MSL tape libraries as well as 1/8 G2 tape autoloaders and tape drives that include the HPE Ultrium 230 Tape Drives (LTO-1), HPE Ultrium 460 Tape Drives (LTO-2), HPE Ultrium 960 Tape Drives (LTO-3), HPE Ultrium 1840.
*Once the VTX bit x’20’ FLAG5 has been turned on in the TMC record, virtual tapes continue to be moved according to the VPD rule, but slot assignment is bypassed. The slot number is set to a dummy value of 9,999,999 (a ’virtual slot’).
*A VTL is exactly what the name implies: a software-generated object that simulates the behavior of a tape library, including robotics, cartridge slots and tape drives for the benefit of OSes.
*
Yukon gold casino no deposit bonus codes 2019. Number of storage cells: 1 to 10,000
*
Starting element address: 1000
*
Number of drives: 1 to 100
*
Starting element address: 500
*
Number of import/export elements: 1 to 20
*
Starting element address: 10Virtual Tape Library
The following describes library components support:
*
Panels
Each supported configuration is presented as a set of panels where:
*
Panel 0 - contains a CAP only
*
Panel 1-10 - contains storage cells and drives
*
Panel 11-50- contains storage cells
*
CAPs
A single CAP is supported. It is identified as CAP 0, and can contain up to 20 CAP cells. The CAP is defined on panel 0 of a StorageTek VTL.
*
Storage Cells
Storage cells are organized into panels containing 200 cells per panel. The largest configuration contains 50 200-cell storage panels for a total of 10,000 cells.
Storage cells are defined on panels 1-50 of a StorageTek VTL.
*
Drives
Drives are organized into panels containing up to 10 drives per panel. The largest drive configuration contains 10 drive panels for a total of 100 drives.
Drives are defined on panels 1-10 of a StorageTek VTL.
*
PTPs
Pass-thru ports are not supported.VTL Behavior
The following behaviors apply specifically to the VTL:
*
Enter Operations
Enter operations in ACSLS are not useful for adding tape volumes to a StorageTek VTL library. In order to discover new volumes in a VTL library, an audit should be performed against that library. This includes the discovery of volumes that may have been imported from the VTL virtual vault.
Enter operations are not explicitly rejected for StorageTek VTL. If you initiate an enter operation, it can simply be canceled.
*
Eject Operations
Eject operations in ACSLS are supported. Any ejected volumes are viewed by the VTL product as now residing in the virtual vault, but this is a VTL feature only - ACSLS is not aware of the virtual vault.
*
Mount and Dismount Operations
ACSLS mount options (read-only, bypass) and dismount options (force) are accepted, but ignored by the StorageTek VTL library. In addition, a normal dismount (without the force option) appears to function as if the force option had been specified.
Caution:Be careful when performing dismount operations, as they may dismount a virtual tape volume while data path operations are in progress.
*
Virtual Tape Drives
After adding or removing virtual drives in a VTL, use the config drives utility to re-examine the drive configuration in ACSLS. When removing virtual tape drives from the VTL, you will need to delete the drives, not just un-assign them, using the VTL Console. Assignment or un-assignment of virtual drives affects the data path and does not affect ACSLS.Virtual Tape Library FreeConfiguring the VTL to ACSLS
This section describes the prerequisites and installation procedures when configuring the VTL to ACSLS.Prerequisites
Before configuring the VTL to ACSLS, you must meet the following prerequisites:
*
ACSLS has been installed, and includes a fibre-channel HBA
*
VTL system has been installed
*
There is fibre-channel connectivity between the systems (an ACSLS initiator port must be connected to a VTL target port)Installation
To configure the VTL to ACSLS, perform the following steps:Virtual Tape Library Slots Software
*
Is black jack chewing gum gluten free. Create a virtual library (StorageTek-VTL) using the VTL console.
Notes:
*
Port perry casino menu. When creating a virtual tape library for use by ACSLS, the tape identifiers for that library should match the traditional 6-character volume label format supported in ACSLS.
*
The VTL Console allows you to create a StorageTek VTL library which exceeds the limits that are supported by ACSLS (10,000 slots, 100 drives). However, if you try to configure an unsupported configuration to ACSLS, the configuration request will fail.
*
When creating a new StorageTek VTL library, the VTL Console gives a warning setting the slot count higher than 678. This warning limit is based on the L700 capacity, and can be ignored for StorageTek VTL library model.
For procedures, refer to the StorageTek Virtual Tape VTL Plus 2.0 (Update 2) Library Software Configuration Guide.
*
Assign the VTL library to ACSLS.
For procedures, refer to the StorageTek Virtual Tape VTL (Plus 2.0 Update 2) Library Software Configuration Guide.
*
Create a SCSI mchanger device driver.
ACSLS is able to automatically discover StorageTek VTL libraries and to create the corresponding /dev/mchanger entries. This discovery takes place when running the install_scsi_sol.sh scripts during installation.
Refer to ’Installing Connections to Your Library Hardware’.
*
Configure VTL to ACSLS.
*
Once the VTL components are operational, configure VTL to ACSLS.
*
Use the following command:
acsss_config
For more information, refer to ’Setting CSI Tuning Variables’ or config acs new (see ’Adding a new ACS’.
*
Audit the VTL library.
After configuring a StorageTek VTL library to ACSLS, an audit must be performed in order to discover the virtual tape volumes, and to identify any inaccessible cells (a panel may only be partially accessible).
*
Use the display lsm * -f type serial_num command to view the VTL configuration.
Register here: http://gg.gg/xfcbs/1
https://diarynote-jp.indered.space
コメント